|
|
|
|
 |
Polythene Olives 15.9mm ID (pack of 10)
|
|

Polythene olives for sealing tubes in compression fittings. Sold in a pack of 10.
|
|
 |
|
|
|
|
 |
TTN Phase Seperator (9.5mm Dia)
|
|

Sintered bronzed filter which can be attached to a nitrogen transfer tube. Aids liquid nitrogen delivery by seperating liquid from vapour, preventing dangerous splashing.
|
|
 |
|
|
|
|
 |
TTN Connector Bush (9.5mm Dia)
|
|

A connector that fits H7-001.
|
|
 |
|
|
|
|
 |
PTFE Sealing Olives for use with LLT and TTL Transfer Tubes
|
|

For sealing LLT and TTL transfer tubes.
|
|
 |
|
|
|
|
 |
Replacement Entry Port Plugs - 0.500"
|
|

For when the port is not in use, to prevent air from entering the port. These plugs fit the ports of the same diameter regardless of the purpose of the port.
|
|
 |
|
|
|
|
 |
Transfer Tube Extension for TTN Series - 500mm
|
|

All TTN series transfer tubes are supplied with M8 thread fitting allowing the attachment of an un-insulated extension tubes. This part has a length of 500 mm and is easily shortened if necessary.
|
|
 |
|
|
|
|
 |
General Purpose Transfer Tubes TTN2F Standard Flexible
|
|

General Transfer tube for normal short duration transfer.
|
|
 |
|
|
|
|
 |
General Purpose Transfer Tube TTN2F Standard Flexible - Dewar Leg Length: 1.0m
|
|

Constructed of high quality stainless steel tubing that is vacuum insulated. Typical flow rates of 1l/min at 0.1bar are achieved. Supplied with pump out fittings and removable siphon nozzles. Compatible with dewar top fitting SV10.
|
|
 |
|
|
|
|
 |
General Purpose Transfer Tube TTN2F Standard Flexible, 0.5M Dewar Leg
|
|

Constructed of high quality stainless steel tubing that is vacuum insulated. Typical flow rates of 1l/min at 0.1bar are achieved. Supplied with pump out fittings and removable siphon nozzles. Compatible with dewar top fitting SV10.
|
|
 |
|
|
|
|
 |
General Purpose Transfer Tube TTN2FDH Standard Flexible
|
|

General Transfer tube for normal short duration transfer.
|
|
 |
|
|
|
|
 |
LLT600/10 - Transfer Tube: 1.0m Dewar Leg, 1.2m Flexible Section
|
|

Horizontal feed LLT transfer tube.
|
|
 |
|
|
|
|
 |
LLT 600/13 - 1.2m Flexible Section
|
|

Transfer tube for horizonatal feed cryostats. Specifically for Oxford instruments continuous flow cryostats with lower running costs, due to low helium consumption, and extended operating range to 2K. Use of LLT transfer line will reduce the consumption of liquid helium and extend the base temperature of the cryostat. A base temperature of better than 2.5K is normally attainable.
|
|
 |
|
|
|
|
 |
LLT 600/13
|
|

Horizontal feed LLT transfer tube.
|
|
 |
|
|
|
|
 |
LLT 600/13 - 1.8m Flexible Section
|
|

Transfer tube for horizonatal feed cryostats. Specifically for Oxford instruments continuous flow cryostats with lower running costs, due to low helium consumption, and extended operating range to 2K. Use of LLT transfer line will reduce the consumption of liquid helium and extend the base temperature of the cryostat. A base temperature of better than 2.5K is normally attainable.
|
|
 |
|
|
|
|
 |
LLT700/10 - Transfer Tube: 1.0m Dewar Leg, 1.3m Flexible Section
|
|

Vertical feed LLT transfer tube.
|
|
 |
|
|
|
|
 |
LLT700/13 - Transfer Tube: 1.3m Dewar Leg, 1.3m Flexible Section
|
|

Vertical feed LLT transfer tube.
|
|
 |
|
|
|
|
 |
LLT 600/13 - 1.5m Flexible Section
|
|

Transfer tube for horizonatal feed cryostats. Specifically for Oxford instruments continuous flow cryostats with lower running costs, due to low helium consumption, and extended operating range to 2K. Use of LLT transfer line will reduce the consumption of liquid helium and extend the base temperature of the cryostat. A base temperature of better than 2.5K is normally attainable.
|
|
 |
|
|
|
|
 |
LLT 650/13
|
|

Automated LLT horizontal feed transfer tube.
|
|
 |
|
|
|
|
 |
LLT650/10 - Automated Transfer Tube: 1.0m Dewar Leg, 1.2m Flexible Section
|
|

Automated horizontal feed transfer tube.
|
|
 |
|
|
|
|
 |
LLT 650/13 - 1.2m Flexible Section
|
|

Automated LLT horizontal feed transfer tube.
|
|
 |
|
|
|
|
 |
LLT 650/13 - 1.8m Flexible Section
|
|

Automated LLT horizontal feed transfer tube.
|
|
 |
|
|
|
|
 |
LLT750/10 - Automated Transfer Tube: 1.0m Dewar Leg, 1.3m Flexible Section
|
|

Automated vertical feed LLT transfer tube.
|
|
 |
|
|
|
|
 |
LLT750/13 - Automated Transfer Tube: 1.3m Dewar Leg, 1.3m Flexible Section
|
|

Automated vertical feed transfer tube.
|
|
 |
|
|
|
|
 |
LLT 650/13 - 1.5m Flexible Section
|
|

Automated LLT horizontal feed transfer tube.
|
|
 |